Chain Automatic Oiling Device

String-like Oiling Device ES/GM

∎Features

  • 1. There are no worries of oiling deficiency.
  • 2. There are no worries of oil drip and scattering.
  • 3. You can expect longer operating life without trouble, since it does not touch the chain.
  • 4. It is possible to conduct automatic oiling, at the minimum required amount when necessary, within a definite period of time.
  • 5. It can correspond to a wide range of oil types and viscosity changes.
  • 6. It is economical, since one device can oil 8 places.
  • 7. Management is easy, since the power source is electricity only.


∎General Drawing

Click the image to view the details of the general drawing.
∎Lubrication Specification
Lubrication Method “String lubrication method” oils by pouring down string oil on the lubrication point of the chain. It is controlled either manually, or by operating the push button switch, or automatically by using the control timer.
Oiling Quantity 5 - 15cm3/min (1 place)
Oiling Capacity Up to 8 places. However, capacity can be increased, by increasing the discharge volume and pressure of the oil pump.
Pressure Control 0.7 - 2MPa
Kinematic Viscosity Range of Oil Used 20 - 2000mm2/s
Piping Capacity Main pipe (Φ 6×4) = up to 15m
Branch pipe (Φ 4×2) = up to 1.5m
Control (Control Unit) Oiling time exclusive type – Oiling time for all links is set in advance, and oiling will automatically stop after the predetermined set time elapses.
Oiling time accumulation type (option) – Only oiling time is counter accumulated.